NAC3MP-HC – powerCON 32 A chassis connector, power-in


The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!

SKU: NAC3MP-HC Category:


Features & Benefits

  • 250 V ac, 32 A single-phase (for ambient temperatures up to 35°C)
  • Premating contact for protective earth
  • Fast and easy locking system to prevent unintentional disengagement
  • Wiring with screw-type terminals for wires 2.5 to 6.0 mm² (AWG 14 – 10)
  • Extremely robust and reliable
  • VDE, UL, cUL and JET approved
  • IEC 62368-1 compliant up to 4000 W

Technical Information

Connection Type powerCON
Gender male
Contact resistance ≤ 3 mΩ
Dielectric strength 4 kVdc / 2.8 kVac
Insulation resistance > 10 GΩ (initial)
Rating Europe EN 61984: 32 A 250 V AC
Rating USA UL 1977: 32 A 250 V AC
Maximal Wattage according to IEC 62368-1 4000 W rms
Lifetime > 1000 mating cycles
Wiresize 2.5 – 6 mm²
Wiresize 14 – 10 AWG
Wiring screw terminals
Locking device Quick Lock
Contact plating 4 µm Ag
Contacts Bronze (CuSn0.2)
Locking element Steel Ck67
Shell Polyamide (PA 6.6 25 % GR)
Flammability UL 94 V-0
Protection class IP 20 (mated)
Safety Requirements EN/IEC 61984
Solderability Complies with IEC 68-2-20
Temperature range -25 °C to +70 °C